Resetting Trip Minimum & Maximum Temperatures - TRED30-16/VFC400

You can configure the TRED30-16R or VFC400 so it tracks the minimum and maximum temperatures since it started logging. This feature needs to be enabled by ticking "Show user resettable Min/Max" in the advanced settings during configuration. 

To reset the Trip Minimum and Maximum temperatures, click the Review/Mark button twice to display the user resettable minimum value. Then press and hold the Review/Mark button for approximately six seconds.

For more detailed instructions please refer to the tutorial video or the "Reviewing Day Statistics directly on the TRED30-16R" section of the product user guide.

https://logtagrecorders.com/download/products/userguides/TRED30-16R_Product_User_Guide.pdf 

Related articles

• Resetting the Logger
• My Logger Shows "STOPPED" on its Display
• TRED30, TREL30 and vaxtag product family
• Logging with pre-start readings
• Known Issue: Damaged Calibration After Configuration

Was this article helpful?

0 out of 0 found this helpful

Still stuck? We're a click away

Submit a request